_____________________________________________________________________________

Guntermann & Drunck GmbH                             Fon +49 (0)271 23872-100
Obere Leimbach 9                                     Fax +49 (0)271 23872-120 
57074 Siegen                                              http://www.gdsys.de
_____________________________________________________________________________

TABLE OF CONTENTS

1. What is the »CrossDisplay-Switching« feature? 
2. Function of the driver
3. Installing the driver
4. Uninstalling the driver

_____________________________________________________________________________


1. WHAT IS THE »CrossDisplay-Switching« FEATURE? 

   The »CrossDisplay-Switching« feature (CDS) lets you switch between 
   computers by moving the mouse. To switch between computers, move the mouse 
   cursor to the edge of the active monitor.
    
   When moving the mouse over the monitor edge, the CDS feature switches to 
   the computer connected to the next monitor.
   
   The following G&D devices support the CDS feature:
   
   * Matrix switches of the series »DVICenter«, »ControlCenter-Compact« and
     »ControlCenter-Digital« when used with the optional 
     »TradeSwitch function«.
   * KM switches of the TradeSwitch series

   Information on how to activate and configure the CDS feature is given 
   in the manuals of the matrix switches as well as in the manual of the
   KVM switches of the »TradeSwitch-USB« series.

   
2. FUNCTION OF THE DRIVER

   When the CDS configuration includes a multi-monitor computer, the
   computer can be operated only when the graphics card driver supports
   combining multiple desktops to one single desktop.
   
   Install the »G&D CDS Multi-Monitor Support« driver if the installed
   graphic cards driver does not support combining multiple desktops or if
   you want to continue working with independent desktops.
   
 
3. INSTALLING THE DRIVER

   NOTE: To run the driver, make sure the »Kernel-Mode Driver
   Framework« (KMDF) version 1.11 or later is installed.
   If this is not the case, the framework is installed during the
   installation of the driver.

   Ensure that your system is activated for the installation.
   If necessary, run a Windows update.

   IMPORTANT: When installing the driver under »Windows XP«, first connect
   the G&D device (see list above) to the computer and turn it on.
   
   * Start the installation wizard provided for the computer’s 
     operating system.
   * Follow the instructions of the installation wizard.

   After installing, the driver is ready for operation.

   NOTE: If you installed the driver under Windows XP while the
   G&D device was not connected or turned off, the driver may not
   be initialised properly.
   
   In this case, uninstall the driver as described under item 4.
   Connect the G&D device to the computer and turn it on. 
   Repeat the installation as described above.
   
   
4. UNINSTALLING THE DRIVER

   * Open the Windows control panel.
   * Double-click »Programs and Features« (Windows 7)
     or »Software« (Windows XP).
   * Click »G&D CDS Multi-Monitor Support«.
   * Click »Uninstall«, and follow the instructions of the wizard.